WD300AA Western Digital 3.5″ hard drive with a storage capacity of 30GB and featuring a IDE interface. WD300AA Western Digital Caviar 30GB 5400RPM ATA-66 2MB Cache 3.5-inch Hard Disk Drive.
All information about the Western Digital WD300AA hard disk drive: technical parameters, failure symptoms, free asked questions, reviews, HDD repair and data recovery.
Western Digital WD300AA Technical Details:
- Hard Disk Model: WDC WD300AA
- Disk Family: Caviar
- Form Factor: 3.5″
- Capacity: 30 GB (30 x 1 000 000 000 bytes)
- Number Of Disks: 3
- Number Of Heads: 6
- Rotational Speed: 5400 RPM
- Rotation Time: 11.11 ms
- Average Rotational Latency: 5.56 ms
- Disk Interface: Ultra-ATA/100
- Buffer-Host Max. Rate: 100 MB/seconds
- Buffer Size: 2048 KB
- Drive Ready Time (typical): 6 seconds
- Average Seek Time: 10.9 ms
- Track To Track Seek Time: 2.0 ms
- Full Stroke Seek Time: 21.0 ms
- Width: 101.6 mm (4.00 inch)
- Depth: 147 mm (5.79 inch)
- Height: 26.1 mm (1.03 inch)
- Weight: 500 grams (1.10 pounds)
- Acoustic (Idle): 3.3 Bel
- Acoustic (Min performance and volume): 3.7 Bel
- Acoustic (Max performance and volume): 4.3 Bel
- Required Power For Spinup: 2330 mA
- Power Required (Seek): 9.96 W
- Power Required (Idle): 6.18 W
- Power Required (Standby): 1.32 W
- Manufacturer: Western Digital Corporation
Western Digital WD300AA Hard Drives:
- WD300AA-60ANA0, DCM HSBBEVHBO, Western Digital 30GB IDE 3.5″ Hard Drive
Western Digital WD300AA Failure Symptoms:
- Electrical Failure Symptoms:
Drive is powered, but shows no sign of function;
Disk knocking as the motor fails to spin;
Clicking sound as the heads search or initialize; - Mechanical Failure Symptoms:
Clicking, grinding sounds;
Completely quiet due to ” motor freeze”;
“music” tone as the disk is powered up; - Logical Failure Examples:
Accidental deletion, accidental format, file corruption, software bugs, file system corruption, viruses and malware, and many, many more. - Firmware Failure Symptoms:
drive powers up, but is not recognised by the computer;
Drive powers up, but is recognised wrongly, sometimes with nonsensical characters;
Drive freezes during booting up; - Bad Platter Area Symptoms:
Hard disk still accessible but appear to “hang” or “sluggish”;
Constant Cyclic Redundancy (CRC) errors;
Unable to access folders or files which could be seen; - Complex Failure Model
Western Digital WD300AA Data Recovery & HDD Repair:
When it comes to data recovery one of the most common problems Western Digital WD300AA Hard Disk Drive experience is burnt circuit board(PCB). So if you will need to match a replacement PCB, it is important that you note the “Board Number” of your current circuit board in addition to the hard drive’s “Model Number“.
Multiple PCB Number revisions:
60-600843-001, etc.
Multiple Model Number revisions:
WD300AA-60ANA0, etc.