ST500LM011 Seagate 2.5″ hard drive with a storage capacity of 500GB and featuring a SATA interface.

All information about the Seagate ST500LM011 hard disk drive: technical parameters, failure symptoms, HDD PCB repair and recommended retailers.

Seagate ST500LM011

Seagate ST500LM011 Technical Details:

  • Disk Family: Momentus
  • Type: HDD
  • Purpose: laptop
  • Form Factor: 2.5″
  • Storage Capacity: 500 GB
  • Buffer memory: 8 MB
  • The number of heads: 4
  • Number of plates: 2
  • Speed of rotation: 5400 rpm
  • Disk Interface: SATA 3Gb/s
  • External data transfer rate: 300 MB/s
  • Average access time, reading: 12 MS
  • Noise idle: 24 dB
  • Operating noise level: 26 dB
  • Dimensions (WxHxL): 69.85×9.5×100 mm
  • Weight: 104 g

Seagate ST500LM011 Hard Drives:

  • Seagate ST500LM011 – 500GB 5.4K RPM SATA 9.5mm 2.5″ Hard Drive

Seagate ST500LM011 Failure Symptoms:

  • Electrical Failure Symptoms:
    Drive is powered, but shows no sign of function;
    Disk knocking as the motor fails to spin;
    Clicking sound as the heads search or initialize;
  • Mechanical Failure Symptoms:
    Clicking, grinding sounds;
    Completely quiet due to “motor freeze”;
    “music” tone as the disk is powered up;
  • Logical Failure Examples:
    Accidental deletion, accidental format, file corruption, software bugs, file system corruption, viruses and malware, and many, many more.
  • Firmware Failure Symptoms:
    drive powers up, but is not recognised by the computer;
    Drive powers up, but is recognised wrongly, sometimes with nonsensical characters;
    Drive freezes during booting up;
  • Bad Platter Area Symptoms:
    Hard disk still accessible but appear to “hang” or “sluggish”;
    Constant Cyclic Redundancy (CRC) errors;
    Unable to access folders or files which could be seen;
  • Complex Failure Model

Seagate ST500LM011 HDD PCB Repair:

When it comes to data recovery one of the most common problems Seagate ST500LM011 Hard Disk Drive experience is burnt circuit board(PCB). So if you will need to match a replacement PCB, it is important that you note the “PCB Number” of your current circuit board in addition to the hard drive’s “Model Number”.

Multiple PCB Number revisions:
BF41-00315A, BF41-00306A, etc.

Best Sellers HDDs

Leave a Reply

Your email address will not be published. Required fields are marked *