Seagate ST10000NE0004 3.5″ hard drive with a storage capacity of 10 TB and featuring a SATA interface. Seagate ST10000NE0004 IronWolf Pro 10 TB 3.5″ Internal Hard Drive Serial ATA-600 7200 RPM 256 MB Buffer.

All information about the Seagate ST10000NE0004 hard disk drive: technical parameters, failure symptoms, frequently asked questions, reviews, HDD repair and data recovery.

Seagate ST10000NE0004

Seagate ST10000NE0004 Technical Details:

Manufacturer:
Seagate
Hard Disk Model:
ST10000NE0004
Disk Family:
IronWolf Pro (NAS)
Form Factor:
3.5″
Capacity:
10 TB (10,000,000,000,000 bytes)
Formatted Capacity:
Approximately 9.09 TB
Rotational Speed:
7200 RPM
Average Seek Time:
8.5 ms (read) / 9.5 ms (write)
Disk Interface:
Serial ATA-600 (SATA 6 Gb/s)
Buffer Size:
262144 KB (256 MB)
External Transfer Rate:
600 MB/s
Mean Time Between Failures (MTBF):
1,200,000 hours
Workload Rating:
300 TB/year

Note: The Seagate ST10000NE0004 is part of the IronWolf Pro series, Seagate’s NAS-optimized hard drive line. These drives feature AgileArray technology for RAID optimization, RV (Rotational Vibration) sensors for multi-bay environments, and IronWolf Health Management for proactive monitoring.


Seagate ST10000NE0004 Hard Drives:

  • ST10000NE0004, ZA2, TK, PN 1ZF101-500, FW EN01, Seagate 10TB SATA 3.5 Hard Drive

Seagate ST10000NE0004 Failure Symptoms:

  • Electrical Failure Symptoms:
    Drive is powered, but shows no sign of function;
    Disk knocking as the motor fails to spin;
    Clicking sound as the heads search or initialize;
  • Mechanical Failure Symptoms:
    Clicking, grinding sounds;
    Completely quiet due to ” motor freeze”;
    “music” tone as the disk is powered up;
  • Logical Failure Examples:
    Accidental deletion, accidental format, file corruption, software bugs, file system corruption, viruses and malware, and many, many more.
  • Firmware Failure Symptoms:
    drive powers up, but is not recognised by the computer;
    Drive powers up, but is recognised wrongly, sometimes with nonsensical characters;
    Drive freezes during booting up;
  • Bad Platter Area Symptoms:
    Hard disk still accessible but appear to “hang” or “sluggish”;
    Constant Cyclic Redundancy (CRC) errors;
    Unable to access folders or files which could be seen;
  • Complex Failure Model

Seagate ST10000NE0004 Data Recovery & HDD Repair:

When it comes to data recovery one of the most common problems Seagate ST10000NE0004 hard drive experience is a burned circuit board (PCB). Therefore, if you need to replace the PCB, be sure to match the “PCB Number” of the current board, such as 100784953, etc.

Ready to pull the trigger? We suggest grabbing this drive on either Amazon.com or Newegg.com — both are trusted retailers with competitive pricing, fast shipping, and reliable customer service. Amazon offers the convenience of Prime shipping and a wealth of user reviews, while Newegg is a favorite among PC builders for its tech-focused selection, frequent combo deals, and excellent customer support for hardware components. (As an Amazon Associate I earn from qualifying purchases. Thanks for your support.)