Below are answers to frequently asked questions about the Seagate ST8000DM005 hard drive, based on available technical information and user discussions.
Q: What is the Seagate ST8000DM005?
A: The Seagate ST8000DM005 is an 8TB internal hard drive designed for desktop storage. It belongs to the BarraCuda Pro series and uses a 3.5-inch form factor with a SATA 6Gb/s interface.
Q: What is the spindle speed of the ST8000DM005?
A: The spindle speed is 7200 RPM, providing faster data access compared to 5400 RPM drives.
Q: What is the cache size?
A: This drive features a 256MB cache buffer, which helps improve data transfer efficiency during read and write operations.
Q: What is the data transfer rate?
A: The maximum sustained data transfer rate is up to 240 MB/s. Actual performance may vary based on system configuration and file sizes.
Q: Is the ST8000DM005 compatible with my computer?
A: It is compatible with most desktop systems that have a SATA 6Gb/s or SATA 3Gb/s port. Ensure your power supply can handle the drive’s power requirements.
Q: What is the power consumption?
A: Typical operating power is around 7.5 watts, with idle power consumption at approximately 5.5 watts.
Q: Does this drive support 4K sector sizes?
A: Yes, it uses Advanced Format 4K physical sectors with 512e emulation, making it compatible with both legacy and modern operating systems.
Q: What is the operating temperature range?
A: The recommended operating temperature is between 5°C and 60°C (41°F to 140°F). Non-operating temperature ranges from -40°C to 70°C (-40°F to 158°F).
Q: Is the ST8000DM005 a solid-state drive (SSD)?
A: No, it is a traditional hard disk drive with spinning platters and a moving actuator arm.
Q: What is the noise level?
A: Idle noise is approximately 2.5 bel, while seeking noise is around 3.0 bel. Performance may vary by unit.
Q: Does it come with a warranty?
A: The drive typically includes a limited warranty. Check the manufacturer’s warranty policy for specific terms and duration.
Q: Can I use this drive in a RAID configuration?
A: Yes, it is suitable for both hardware and software RAID setups. Ensure your RAID controller supports SATA drives.
Q: What is the physical size?
A: The dimensions are 146.99 mm x 101.85 mm x 26.11 mm (5.787 x 4.010 x 1.028 inches), weighing approximately 780 grams.
Q: Is this drive suitable for surveillance systems?
A: It is designed for desktop use. For 24/7 operation like DVRs or NVRs, consider drives specifically rated for surveillance workloads.
Q: How should I handle the drive during installation?
A: Handle the drive by its edges and avoid touching the exposed circuit board. Use anti-static precautions to prevent damage from static electricity.