Below are answers to frequently asked questions about the Maxtor 4W080H6 hard drive, based on available technical information and user discussions.
Q: What is the Maxtor 4W080H6?
A: The Maxtor 4W080H6 is a 3.5-inch internal hard disk drive that provides 80 gigabytes of storage capacity. It was designed for desktop computer systems and offers a standard IDE/ATA interface for connectivity.
Q: What are the key specifications of the Maxtor 4W080H6?
A: This drive features a spindle speed of 5400 RPM, a 2 MB buffer size, and an average seek time of approximately 9.0 milliseconds. It operates on a 5-volt and 12-volt power supply and supports Ultra ATA/100 data transfer rates.
Q: Is the Maxtor 4W080H6 compatible with modern operating systems?
A: Compatibility with modern operating systems is limited due to its older IDE interface. It works best with legacy systems running Windows 98, Windows 2000, or Windows XP. Modern systems may require a PCIe IDE controller card for proper functionality.
Q: What is the physical size of this hard drive?
A: The Maxtor 4W080H6 has a standard 3.5-inch form factor with dimensions of approximately 1 inch in height, 4 inches in width, and 5.75 inches in depth. It weighs about 1.5 pounds.
Q: How reliable is the Maxtor 4W080H6 for data storage?
A: This drive has a typical mean time between failures rating of around 500,000 hours. It was built for general desktop use and is not recommended for enterprise or mission-critical environments due to its age and lower performance specifications.
Q: Can the Maxtor 4W080H6 be used in a RAID configuration?
A: Yes, the drive can be used in RAID 0 or RAID 1 configurations when paired with a compatible RAID controller. However, performance and capacity are limited compared to modern drives, making it suitable only for legacy system upgrades or specific retro computing projects.
Q: What is the power consumption of the Maxtor 4W080H6?
A: The typical power consumption is around 6.5 watts during read/write operations and approximately 4.5 watts when idle. It requires both 5-volt and 12-volt power rails from the computer’s power supply.
Q: How does the Maxtor 4W080H6 connect to a computer?
A: It uses a 40-pin IDE (PATA) connector for data transfer and a standard 4-pin Molex power connector. The jumper settings on the drive allow configuration as master, slave, or cable select for use in multi-drive setups.
Q: What are common alternatives to the Maxtor 4W080H6?
A: Common alternatives from the same era include the Western Digital Caviar series and Seagate Barracuda ATA drives with similar capacities. For modern replacements, any SATA SSD or hard drive with a capacity of 120 GB or higher would offer superior speed and reliability.