Below are answers to frequently asked questions about the Fujitsu M2724TAM hard drive, based on available technical information and user discussions.
Q: What is the Fujitsu M2724TAM?
A: The Fujitsu M2724TAM is a 2.5-inch Serial Attached SCSI hard disk drive with a storage capacity of 73.5 GB and a rotational speed of 10,000 RPM. It is designed for enterprise storage systems and servers requiring high reliability and performance.
Q: What interface does the M2724TAM use?
A: This drive uses a SAS interface, which supports full-duplex data transfer and offers higher throughput compared to SATA, making it suitable for mission-critical applications.
Q: What is the typical power consumption of this drive?
A: The Fujitsu M2724TAM typically consumes around 5.0 watts during read/write operations and approximately 3.0 watts when idle, ensuring efficient energy use for continuous operation.
Q: Is the M2724TAM compatible with standard SAS controllers?
A: Yes, the drive is fully compatible with standard SAS controllers that support the SAS 3 Gbps standard, and it can be used in most enterprise-grade servers and RAID arrays.
Q: What is the mean time between failures for this model?
A: The Fujitsu M2724TAM has a mean time between failures of 1.2 million hours, reflecting its robust design for long-term reliability in demanding environments.
Q: Can this drive be used in hot-swap configurations?
A: Yes, the M2724TAM supports hot-swap functionality, allowing for drive replacement without shutting down the system, provided the enclosure and controller support this feature.
Q: What is the operating temperature range?
A: The operating temperature range for this drive is 5°C to 55°C, making it suitable for most data center environments with proper cooling.
Q: Does the drive support S.M.A.R.T. monitoring?
A: Yes, the Fujitsu M2724TAM includes S.M.A.R.T. (Self-Monitoring, Analysis, and Reporting Technology) to help predict potential drive failures and ensure proactive maintenance.
Q: What is the data transfer rate of the M2724TAM?
A: The drive supports a SAS interface with a data transfer rate of up to 3 Gbps, ensuring consistent performance for high-bandwidth tasks.
Q: How noisy is this hard drive during operation?
A: The acoustic noise level is typically around 2.9 bel when idle and 3.2 bel during seek operations, making it relatively quiet for an enterprise-class drive.