IBM DTLA-305040 IBM 3.5″ hard drive with a storage capacity of 41170MB and featuring an IDE interface.
All information about the IBM DTLA-305040 hard disk drive: technical parameters, failure symptoms, HDD PCB repair and recommended retailers.
IBM DTLA-305040 Technical Details:
- Hard Disk Model: HITACHI IBM-DTLA-305040
- Disk Family: Deskstar 40GV
- Form Factor: 3.5″
- Capacity: 41170 MB (41170 x 1 000 000 bytes)
- Number Of Disks: 2
- Number Of Heads: 4
- Rotational Speed: 5400 RPM
- Rotation Time: 11.11 ms
- Average Rotational Latency: 5.56 ms
- Disk Interface: Ultra-ATA/100
- Buffer-Host Max. Rate: 100 MB/seconds
- Buffer Size: 512 KB
- Average Seek Time: 9.5 ms
- Track To Track Seek Time: 1.6 ms
- Full Stroke Seek Time: 16 ms
- Width: 101.6 mm (3.98 inch)
- Depth: 146.0 mm (5.75 inch)
- Height: 25.4 mm (0.98 inch)
- Weight: 550 grams (1.21 pounds)
- Acoustic (Idle): 2.9 Bel
- Required Power For Spinup: 2800 mA
- Power Required (Seek): 12.0 W
- Power Required (Idle): 6.70 W
- Power Required (Standby): 2.0 W
- Manufacturer: Hitachi Global Storage Technologies
IBM DTLA-305040 Hard Drives:
- IBM DTLA-305040 HITACHI 3.5″ 41170 MB Ultra-ATA/100 Deskstar 40GV 5400 RPM Hard Drive.
IBM DTLA-305040 Failure Symptoms:
- Electrical Failure Symptoms:
Drive is powered, but shows no sign of function;
Disk knocking as the motor fails to spin;
Clicking sound as the heads search or initialize; - Mechanical Failure Symptoms:
Clicking, grinding sounds;
Completely quiet due to “motor freeze”;
“music” tone as the disk is powered up; - Logical Failure Examples:
Accidental deletion, accidental format, file corruption, software bugs, file system corruption, viruses and malware, and many, many more. - Firmware Failure Symptoms:
drive powers up, but is not recognised by the computer;
Drive powers up, but is recognised wrongly, sometimes with nonsensical characters;
Drive freezes during booting up; - Bad Platter Area Symptoms:
Hard disk still accessible but appear to “hang” or “sluggish”;
Constant Cyclic Redundancy (CRC) errors;
Unable to access folders or files which could be seen; - Complex Failure Model
IBM DTLA-305040 HDD PCB Repair:
When it comes to data recovery one of the most common problems IBM DTLA-305040 hard drive experience is a burned circuit board (PCB). Therefore, if you need to replace the PCB, be sure to match the “Main Contorl Chip Number” of the current board, such as etc.
