Below are answers to frequently asked questions about the Maxtor 60160P0 hard drive, based on available technical information and user discussions.
Q: What is the Maxtor 60160P0?
A: The Maxtor 60160P0 is a 3.5-inch internal hard disk drive that was part of Maxtor’s DiamondMax series.
Q: What is the storage capacity of the Maxtor 60160P0?
A: The Maxtor 60160P0 has a formatted storage capacity of 160 gigabytes.
Q: What interface does the Maxtor 60160P0 use?
A: This hard drive uses a parallel ATA interface, also known as IDE, for connecting to a desktop computer motherboard.
Q: What is the rotational speed of the Maxtor 60160P0?
A: The Maxtor 60160P0 operates at a rotational speed of 7200 revolutions per minute.
Q: What is the cache buffer size on the Maxtor 60160P0?
A: This hard drive features a 2-megabyte cache buffer to assist with data transfer performance.
Q: Is the Maxtor 60160P0 compatible with modern operating systems?
A: Compatibility depends on the system, but the drive works with legacy operating systems and older hardware that supports the IDE interface.
Q: What is the physical form factor of the Maxtor 60160P0?
A: The Maxtor 60160P0 follows the standard 3.5-inch desktop hard drive form factor.
Q: What is the average seek time of the Maxtor 60160P0?
A: The average seek time for the Maxtor 60160P0 is approximately 8.5 milliseconds for reads.
Q: Can the Maxtor 60160P0 be used as a primary boot drive?
A: Yes, the Maxtor 60160P0 can function as a primary boot drive in systems with an IDE controller.
Q: What type of internal connector does the Maxtor 60160P0 require?
A: The drive requires a standard 40-pin IDE cable and a 4-pin Molex power connector from the power supply.