Seagate ST16000NE000 3.5″ hard drive with a storage capacity of 16TB and featuring a SATA interface.
All information about the Seagate ST16000NE000 hard disk drive: technical parameters, failure symptoms, HDD PCB repair and recommended retailers.
Seagate ST16000NE000 Technical Details:
- Hard Disk Model: SEAGATE ST16000NE000
- Disk Family: IronWolf Pro
- Form Factor: 3.5″
- Capacity: 16 TB (16000 x 1 000 000 000 bytes)
- Number Of Disks: 9
- Number Of Heads: 18
- Rotational Speed: 7200 RPM
- Rotation Time: 8.33 ms
- Average Rotational Latency: 4.16 ms
- Disk Interface: Serial-ATA/600
- Buffer-Host Max. Rate: 600 MB/seconds
- Buffer Size: 262144 KB
- Average Seek Time: 4.16 ms
- Width: 101.85 mm (4.01 inch)
- Depth: 146.99 mm (5.79 inch)
- Height: 26.11 mm (1.03 inch)
- Weight: 670 grams (1.48 pounds)
- Acoustic (Idle): 2.8 Bel
- Required Power For Spinup: 2000 mA
- Power Required (Seek): 7.6 W
- Power Required (Idle): 5.0 W
- Power Required (Standby): 1.0 W
- Manufacturer: Seagate Technology LLC
Seagate ST16000NE000 Hard Drives:
- Seagate ST16000NE000 IronWolf Pro 16 TB 3.5″ Internal Hard Drive Serial ATA-600 7200 RPM 256 MB Buffer hard drive;
Seagate ST16000NE000 Failure Symptoms:
- Electrical Failure Symptoms:
Drive is powered, but shows no sign of function;
Disk knocking as the motor fails to spin;
Clicking sound as the heads search or initialize; - Mechanical Failure Symptoms:
Clicking, grinding sounds;
Completely quiet due to “motor freeze”;
“music” tone as the disk is powered up; - Logical Failure Examples:
Accidental deletion, accidental format, file corruption, software bugs, file system corruption, viruses and malware, and many, many more. - Firmware Failure Symptoms:
drive powers up, but is not recognised by the computer;
Drive powers up, but is recognised wrongly, sometimes with nonsensical characters;
Drive freezes during booting up; - Bad Platter Area Symptoms:
Hard disk still accessible but appear to “hang” or “sluggish”;
Constant Cyclic Redundancy (CRC) errors;
Unable to access folders or files which could be seen; - Complex Failure Model
Seagate ST16000NE000 HDD PCB Repair:
When it comes to data recovery one of the most common problems Seagate ST16000NE000 hard drive experience is a burned circuit board (PCB). Therefore, if you need to replace the PCB, be sure to match the “PCB Number” of the current board, such as 100833707 REV B, etc.
