Below are answers to frequently asked questions about the Seagate ST336706LC hard drive, based on available technical information and user discussions.
Q: What is the Seagate ST336706LC?
A: The Seagate ST336706LC is a 36.7 GB Ultra160 SCSI hard drive designed for enterprise and server environments. It features a 10,000 RPM spindle speed and a 68-pin SCA-2 connector for hot-swap compatibility.
Q: What are the key specifications of the ST336706LC?
A: This drive offers a formatted capacity of 36.7 GB, an interface of Ultra160 SCSI (LVD), a rotational speed of 10,000 RPM, a seek time of 4.7 ms read and 5.2 ms write, and a sustained data transfer rate of up to 69 MB/s. It uses a 3.5-inch form factor and operates on a 5V and 12V power supply.
Q: Is the ST336706LC compatible with modern systems?
A: Compatibility depends on the host system having an available Ultra160 SCSI controller or adapter. It is not compatible with SATA or SAS ports without a converter. Many older servers, workstations, and storage arrays natively support this drive.
Q: What type of connector does the ST336706LC use?
A: The drive uses a 68-pin SCA-2 connector, which integrates power and data signals. This allows it to be used in hot-swap backplanes commonly found in enterprise servers.
Q: Can the ST336706LC be used in a desktop computer?
A: Yes, with a compatible Ultra160 SCSI controller card and a 68-pin SCSI cable. An internal power adapter may be required if the desktop power supply does not match the drive’s power requirements.
Q: What is the operating temperature range for this drive?
A: The operating temperature range is typically 5°C to 55°C (41°F to 131°F). Non-operating temperature range is -40°C to 70°C (-40°F to 158°F). Always ensure adequate airflow in the system enclosure.
Q: How does the ST336706LC compare to newer SCSI drives?
A: The ST336706LC is an older enterprise drive with lower capacity and slower data transfer rates compared to modern SCSI or SAS drives. However, it remains reliable for legacy systems and specific applications requiring SCSI protocols.
Q: Is the ST336706LC still manufactured?
A: No, the ST336706LC is a discontinued model. It can be found on secondary markets as used or refurbished stock. Seagate no longer produces or warranties this drive.
Q: What are common failure points for the ST336706LC?
A: Common failure points include worn bearings due to age, electronic component failure on the PCB (printed circuit board), and bad sectors developed over time. A stable power supply and proper cooling reduce failure risk.
Q: Can I use the ST336706LC in a RAID array?
A: Yes, this drive supports RAID setups in server environments with compatible SCSI controllers. It is suited for RAID 0, 1, 5, or other configurations, provided the controller firmware supports the drive.
Q: What does the model number ST336706LC break down to?
A: ST stands for Seagate Technology. 336 denotes the capacity in megabytes (36.7 GB). 706 indicates the product series. LC designates the 68-pin SCA-2 connection and low voltage differential (LVD) interface.
Q: What is the shock tolerance of the ST336706LC?
A: Operational shock tolerance is approximately 65 G for 2 ms duration. Non-operational shock tolerance is higher, around 200 G for 1 ms duration. The drive should not be moved during operation to avoid damage.
Q: What is the noise level of the ST336706LC?
A: Noise levels are typically around 3.5 to 4.0 bels during idle operation and slightly higher during active seek operations. Sound levels can vary based on mounting and system case design.
Q: What firmware version does the ST336706LC use?
A: Firmware versions vary by production batch and date. Common firmware versions include MS00, MS01, and MS02. The exact version can be checked using SCSI utility software on the host system.
Q: What is the warranty period for the ST336706LC?
A: When originally manufactured, the drive came with a standard 5-year warranty from Seagate. As a discontinued product, no new warranty is available from the manufacturer. Used drives should be tested immediately upon acquisition.