Below are answers to frequently asked questions about the Toshiba MK1661GSYG hard drive, based on available technical information and user discussions.
Q: What is the storage capacity of the Toshiba MK1661GSYG?
A: The drive has a total formatted capacity of 160 gigabytes. It uses a platter density that supports this capacity within a 2.5-inch form factor.
Q: What interface does this hard drive use?
A: The MK1661GSYG is equipped with a Serial ATA (SATA) 3.0 Gbps interface. It is backward compatible with SATA 1.5 Gbps systems.
Q: What is the spindle speed of the Toshiba MK1661GSYG?
A: This hard drive spins at 7200 revolutions per minute (RPM). This speed provides a balance between performance and power consumption for mobile computing.
Q: How large is the internal cache buffer?
A: The drive includes an 16 megabyte cache buffer. This buffer improves read and write performance during data transfers.
Q: What are the physical dimensions of this drive?
A: The MK1661GSYG follows the standard 2.5-inch form factor. Its dimensions are approximately 70 millimeters in width, 100 millimeters in depth, and 9.5 millimeters in height.
Q: What is the average seek time for this model?
A: The average seek time is rated at 11 milliseconds for read operations and 12 milliseconds for write operations. This includes settling time.
Q: Does this drive support Advanced Format (AF) 4K sectors?
A: The Toshiba MK1661GSYG is a traditional 512-byte sector drive. It does not use Advanced Format 4K sector technology.
Q: What is the typical power consumption of the MK1661GSYG?
A: During read and write operations, power consumption is typically around 2.3 watts. In idle mode, it consumes approximately 0.8 watts.
Q: Is the drive compatible with RAID configurations?
A: Yes, the SATA interface allows the MK1661GSYG to be used in RAID 0, RAID 1, or other standard RAID arrays. It supports hot-plug functionality if the host controller supports it.
Q: What operating systems are compatible with this hard drive?
A: The drive works with any operating system that supports standard SATA mass storage devices. This includes Windows, macOS, Linux, and many other platforms.
Q: What is the shock tolerance during operation?
A: The non-operating shock tolerance is rated at 900 Gs for 1 millisecond duration. The operating shock tolerance is lower at 300 Gs for 2 millisecond duration.
Q: How does the noise level compare to other 2.5-inch drives?
A: The acoustic output is rated at 25 decibels during idle and 28 decibels during seek operations. This is within the typical range for 7200 RPM 2.5-inch hard drives.