ST31000426SS Seagate 3.5″ hard drive with a storage capacity of 1TB and featuring a SAS interface.
All information about the Seagate ST31000426SS hard disk drive: technical parameters, failure symptoms, HDD PCB repair and recommended retailers.
Seagate ST31000426SS Technical Details:
- Seagate Model: ST31000426SS
- Enterprise Grade
- Capacity: 1TB
- Speed: 7.2K RPM
- Interface Types: SAS
- Form Factor: 3.5″ LFF Hard Drive
- Encryption/SED Supported
- Sector Size: 512 / 512e
- Sustained Throughput: 60 to 150
- Average Seek Time: 8.5/9.5
- Electrical Interface: SAS-2 6Gbps
Seagate ST31000426SS Hard Drives:
- Seagate ST31000426SS 1TB 3.5in 6Gbps 7.2K RPM HS SED FIPS Constellation ES SAS HDD
Seagate ST31000426SS Failure Symptoms:
- Electrical Failure Symptoms:
Drive is powered, but shows no sign of function;
Disk knocking as the motor fails to spin;
Clicking sound as the heads search or initialize; - Mechanical Failure Symptoms:
Clicking, grinding sounds;
Completely quiet due to “motor freeze”;
“music” tone as the disk is powered up; - Logical Failure Examples:
Accidental deletion, accidental format, file corruption, software bugs, file system corruption, viruses and malware, and many, many more. - Firmware Failure Symptoms:
drive powers up, but is not recognised by the computer;
Drive powers up, but is recognised wrongly, sometimes with nonsensical characters;
Drive freezes during booting up; - Bad Platter Area Symptoms:
Hard disk still accessible but appear to “hang” or “sluggish”;
Constant Cyclic Redundancy (CRC) errors;
Unable to access folders or files which could be seen; - Complex Failure Model
Seagate ST31000426SS HDD PCB Repair:
When it comes to data recovery one of the most common problems Seagate ST31000426SS Hard Disk Drive experience is burnt circuit board(PCB). So if you will need to match a replacement PCB, it is important that you note the “PCB Number” of your current circuit board in addition to the hard drive’s “Model Number”.
Multiple PCB Number revisions:
, etc.
