ST373355SS Seagate 3.5″ hard drive with a storage capacity of 73.4GB and featuring a SAS interface.
All information about the Seagate ST373355SS hard disk drive: technical parameters, failure symptoms, frequently asked questions, reviews, HDD repair and data recovery.
Seagate ST373355SS Technical Details:
- Hard Disk Model: Seagate ST373355SS
- Disk Family: Cheetah 15K.5
- Form Factor: 3.5″
- Capacity: 73.4 GB (73 400 000 000 bytes)
- Number Of Disks: 1
- Number Of Heads: 2
- Rotational Speed: 15000 RPM
- Rotation Time: 4.00 ms
- Average Rotational Latency: 2.00 ms
- Disk Interface: Serial Attached SCSI (SAS-1 3Gbps)
- Buffer-Host Max. Rate: 300 MB/seconds
- Buffer Size: 16384 KB (16 MB)
- Drive Ready Time (typical): 15.0 seconds
- Average Seek Time: 3.5 ms
- Track To Track Seek Time: 0.2 ms
- Width: 101.6 mm (4.00 inch)
- Depth: 146.1 mm (5.75 inch)
- Height: 25.4 mm (1.00 inch)
- Weight: 671 grams (1.48 pounds)
- Acoustic (Idle): 3.6 Bel
- Acoustic (Min performance and volume): 3.6 Bel
- Acoustic (Max performance and volume): 4.0 Bel
- Required Power For Spinup: 12V / 5V (Peak 2.8A)
- Power Required (Seek): 14.2 W
- Power Required (Idle): 9.6 W
- Power Required (Standby): 4.5 W
- Manufacturer: Seagate Technology LLC
Seagate ST373355SS Hard Drives:
- ST373355SS, 3LQ, AMKSPR, PN 9DL066-051, FW T107, Seagate 73GB SAS 3.5″ Hard Drive
- ST373355SS, 3LQ, PN 9DL066-051, FW T107, Seagate 73GB SAS 3.5″ Hard Drive
Seagate ST373355SS Failure Symptoms:
- Electrical Failure Symptoms:
Drive is powered, but shows no sign of function;
Disk knocking as the motor fails to spin;
Clicking sound as the heads search or initialize; - Mechanical Failure Symptoms:
Clicking, grinding sounds;
Completely quiet due to ” motor freeze”;
“music” tone as the disk is powered up; - Logical Failure Examples:
Accidental deletion, accidental format, file corruption, software bugs, file system corruption, viruses and malware, and many, many more. - Firmware Failure Symptoms:
drive powers up, but is not recognised by the computer;
Drive powers up, but is recognised wrongly, sometimes with nonsensical characters;
Drive freezes during booting up; - Bad Platter Area Symptoms:
Hard disk still accessible but appear to “hang” or “sluggish”;
Constant Cyclic Redundancy (CRC) errors;
Unable to access folders or files which could be seen; - Complex Failure Model
Seagate ST373355SS Data Recovery & HDD Repair:
When it comes to data recovery one of the most common problems Seagate ST373355SS Hard Disk Drive experience is burnt circuit board(PCB). So if you will need to match a replacement PCB, it is important that you note the “Board Number” of your current circuit board in addition to the hard drive’s “Model Number“.
Multiple PCB Number revisions:
100411437, etc.