ST3802110A Seagate 3.5″ hard drive with a storage capacity of 80GB and featuring a IDE interface. ST3802110AS Seagate Barracuda 80GB 7200RPM SATA 3Gb/s 2MB Cache 3.5-inch Hard Drive.
All information about the Seagate ST3802110A hard disk drive: technical parameters, failure symptoms, free asked questions, reviews, HDD repair and data recovery.
Seagate ST3802110A Technical Details:
- Hard Disk Model: SEAGATE ST3802110A
- Disk Family: Barracuda 7200.9 802110
- Form Factor: 3.5″
- Capacity: 80 GB (80 x 1 000 000 000 bytes)
- Number Of Disks: 1
- Number Of Heads: 1
- Rotational Speed: 7200 RPM
- Rotation Time: 8.33 ms
- Average Rotational Latency: 4.17 ms
- Disk Interface: Ultra-ATA/100
- Buffer-Host Max. Rate: 100 MB/seconds
- Buffer Size: 2048 KB
- Width: 101.6 mm (4.00 inch)
- Depth: 146.99 mm (5.79 inch)
- Height: 26.1 mm (1.03 inch)
- Weight: 580 grams (1.28 pounds)
- Acoustic (Idle): 2.5 Bel
- Acoustic (Min performance and volume): 2.7 Bel
- Acoustic (Max performance and volume): 2.7 Bel
- Required Power For Spinup: 2800 mA
- Power Required (Seek): 12.8 W
- Power Required (Idle): 7.20 W
- Power Required (Standby): 0.80 W
- Manufacturer: Seagate Technology
Seagate ST3802110A Hard Drives:
- ST3802110AS, 5LR, WU, PN 9BD111-500, FW 2AAA, Seagate 80GB SATA 3.5″ Hard Drive
- ST3802110A, 5LR, WU, PN 9BD011-303, FW 3.AAE, Seagate 80GB IDE 3.5″ Hard Drive
- ST3802110A, 5LR, WU, PN 9BD011-302, FW 3.AAD, Seagate 80GB IDE 3.5″ Hard Drive
- ST3802110A, 3LS, AMK, PN 9BD011-301, FW 2.51, Seagate 80GB IDE 3.5″ Hard Drive
- ST3802110A, 4LR, TK, PN 9BD011-020, FW 3.AHH, Seagate 80GB IDE 3.5″ Hard Drive
- ST3802110A, 5LR, WU, PN 9BD011-021, FW 3.AHD, Seagate 80GB IDE 3.5″ Hard Drive
- ST3802110ACE, 9LS, TK, PN 9BE011-510, FW 3.ACB, Seagate 80GB IDE 3.5″ Hard Drive
- ST3802110AS, 5LR, WU, PN 9BD111-040, FW 3.AAH, Seagate 80GB SATA 3.5″ Hard Drive
- ST3802110A, 9LR, TK, PN 9BD011-033, FW 3.ADH, Seagate 80GB IDE 3.5″ Hard Drive
- ST3802110A, 5LR, WU, PN 9BD011-304, FW 3.AAJ, Seagate 80GB IDE 3.5″ Hard Drive
- ST3802110A, 4LR, TK, PN 9BD011-033, FW 3.ADH, Seagate 80GB IDE 3.5″ Hard Drive
- ST3802110ACE, 9LR, TK, PN 9BE011-510, FW 3.ACB, Seagate 80GB IDE 3.5″ Hard Drive
- ST3802110A, 3LR, AMK, PN 9BD011-301, FW 2AAA, Seagate 80GB IDE 3.5″ Hard Drive
- ST3802110A, 4LR, TK, PN 9BD011-304, FW 3.AAJ, Seagate 80GB IDE 3.5″ Hard Drive
- ST3802110A, 5LS, WU, PN 9BD011-301, FW 3.AAD, Seagate 80GB IDE 3.5″ Hard Drive
Seagate ST3802110A Failure Symptoms:
- Electrical Failure Symptoms:
Drive is powered, but shows no sign of function;
Disk knocking as the motor fails to spin;
Clicking sound as the heads search or initialize; - Mechanical Failure Symptoms:
Clicking, grinding sounds;
Completely quiet due to ” motor freeze”;
“music” tone as the disk is powered up; - Logical Failure Examples:
Accidental deletion, accidental format, file corruption, software bugs, file system corruption, viruses and malware, and many, many more. - Firmware Failure Symptoms:
drive powers up, but is not recognised by the computer;
Drive powers up, but is recognised wrongly, sometimes with nonsensical characters;
Drive freezes during booting up; - Bad Platter Area Symptoms:
Hard disk still accessible but appear to “hang” or “sluggish”;
Constant Cyclic Redundancy (CRC) errors;
Unable to access folders or files which could be seen; - Complex Failure Model
Seagate ST3802110A Data Recovery & HDD Repair:
When it comes to data recovery one of the most common problems Seagate ST3802110A Hard Disk Drive experience is burnt circuit board(PCB). So if you will need to match a replacement PCB, it is important that you note the “Board Number” of your current circuit board in addition to the hard drive’s “Model Number“.
Multiple PCB Number revisions:
100368175, 100355589, 100368182, 100389148, etc.