ST6000NM021A Seagate 3.5″ hard drive with a storage capacity of 6TB and featuring a SATA interface.

All information about the Seagate ST6000NM021A hard disk drive: technical parameters, failure symptoms, HDD PCB repair and recommended retailers.

Seagate ST6000NM021A

Seagate ST6000NM021A Technical Details:

  • Storage Capacity: 6 TB
  • Disk Format: 512e
  • Spindle Speed (rpm): 7200
  • Buffer: 256 MB
  • Wireless LAN: No
  • Disk Interface: SATA
  • Drive Interface Standard: SATA/600
  • Operating Power Consumption: 11.67 W
  • Drive Type: Internal
  • Height: 1.03″ (26.10 mm)
  • Width: 4.01″ (101.85 mm)
  • Depth: 5.79″ (147 mm)
  • Weight: 693 g
  • Device Supported: Storage System

Seagate ST6000NM021A Hard Drives:

  • Seagate Exos 7E8 ST6000NM021A 6TB 7200 RPM 256MB Cache SATA 6.0Gb/s 3.5″ Hard Drive, 512e

Seagate ST6000NM021A Failure Symptoms:

  • Electrical Failure Symptoms:
    Drive is powered, but shows no sign of function;
    Disk knocking as the motor fails to spin;
    Clicking sound as the heads search or initialize;
  • Mechanical Failure Symptoms:
    Clicking, grinding sounds;
    Completely quiet due to “motor freeze”;
    “music” tone as the disk is powered up;
  • Logical Failure Examples:
    Accidental deletion, accidental format, file corruption, software bugs, file system corruption, viruses and malware, and many, many more.
  • Firmware Failure Symptoms:
    drive powers up, but is not recognised by the computer;
    Drive powers up, but is recognised wrongly, sometimes with nonsensical characters;
    Drive freezes during booting up;
  • Bad Platter Area Symptoms:
    Hard disk still accessible but appear to “hang” or “sluggish”;
    Constant Cyclic Redundancy (CRC) errors;
    Unable to access folders or files which could be seen;
  • Complex Failure Model

Seagate ST6000NM021A HDD PCB Repair:

When it comes to data recovery one of the most common problems Seagate ST6000NM021A Hard Disk Drive experience is burnt circuit board(PCB). So if you will need to match a replacement PCB, it is important that you note the “PCB Number” of your current circuit board in addition to the hard drive’s “Model Number”.

Multiple PCB Number revisions:
, etc.

Leave a Reply

Your email address will not be published. Required fields are marked *